Mars 3 Pro

$19.99
Shipping calculated at checkout.

  • 4K Monochrome LCD
  • Powerful COB Light Source
  • Large Build Volume
  • Designed for Reliability
  • Better Printing Experience
Ship From:
Ship From:
Product information

Where We Ship

Orders placed on Elegoo official website can be shipped to the following countries and regions:

Shipping Area

Shipping To

Shipping From

Estimated Delivery Time

North America

the United States

the United States

1. In-stock Product:
   3-7 workdays for delivery
2. Pre-owned Product:
   4-10 workdays for delivery
3. Pre-order Product:
   We will ship the product according to the estimated delivery time on the page, after shipment, it takes 3-7 workdays for delivery.

Canada

Canada

Europe

Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland

EU warehouse

the United Kingdom, Jersey, Guernsey

the United Kingdom

Asia Pacific

Australia

Australia

Japan

Japan

 

Shipping Restrictions

  • [the United States] We can ship orders to the contiguous 48 states and the District of Columbia, excluding Alaska, American Samoa, Micronesia, Guam, Hawaii, Marshall Islands, Northern Mariana Islands, Palau, Puerto Rico, and the U.S. Virgin Islands. Please note that we are unable to ship to P.O. Boxes and APO/FPO addresses.
  • [United Kingdom] Due to high transportation costs, some preowned products (good used/for parts only/damaged) will not support delivery to the Scottish Highlands, Scottish Islands, Northern Ireland, Jersey and Guernsey.
  • [Australia] Unable to ship the Jupiter and Jupiter SE 3D printer to post office addresses.
  • You may only ship to one address per order. If your order contains items that require shipping to multiple locations, you’ll need to place separate orders for each address.

Shipping Fees:

For orders over $50 to most of the countries and regions listed above, it’s FREE SHIPPING. Orders under $50 will be charged a $15 shipping fee. EXCEPT for those countries and conditions listed:
1. Orders including Saturn 4, Saturn 4 Ultra or Mars 5 Ultra will be charged $20/pc shipping fees;
2. Australia: For orders including Jupiter SE, some areas (Northern Territory, Queensland, Tasmania, Western Australia) will be charged a shipping fee;
2. Cyprus: Each order will be charged a $30 shipping fee.

For orders shipped to EU countries and the United Kingdom (EXCEPT for several countries and regions listed below), we are responsible for customs duties.

Several countries and regions are: Norway, Switzerland, Las Palmas (ES), Santa Cruz de Tenerife (ES), Ceuta (ES), Melilla (ES), Åland Islands (FI), etc.

Ownership, Terms, and Risk

Please ensure your address details are correct as once the parcel is on its way we cannot re-direct it. It is your responsibility to check and verify. Should any loss be incurred due to the input of an incorrect address or a fraudulent transaction, you will be held responsible as the sole bearer of the pecuniary loss.

Note: Please do not enter any PO Box address, otherwise your package can’t be dispatched by any express.

Normally the orders that have been shipped out (you have received the tracking number or your order status has been completed) cannot be canceled. If you have to refuse delivery due to force majeure after the package is dispatched from ELEGOO, you are subject to the return and refund policies and must pay for the original shipping charges, which will be deducted from your refund.

If you do not contact the delivery company within 5 days after the delivery attempt, they may return the goods to us. A return charge may be assigned to us which may be twice of the delivery cost. If the case of this happens, we reserve the right to ask you to pay the return charge plus an additional re-delivery cost before we re-dispatch the item to you.

When the goods are delivered, please check that the order is complete and undamaged. If there is any damage to the goods at the point of delivery, you can contact us: info@elegoo.com

Following a successful transaction you will be notified when your order has been dispatched with a tracking number provided, if you do not receive a tracking number within 48 hours of completing your purchase, we ask that you first check your email “Junk/Spam” folder and then contact us: info@elegoo.com

Refund Policy & Warranty Info

Thank you for your purchase. We hope you are happy with your purchase. However, if you are not completely satisfied with your purchase for any reason, ELEGOO provides a straightforward warranty that is processed in the most hassle-free way possible. Please refer to the warranty policy below, as warranty periods and warranty rules differ according to the models and parts list.

 

Warranty Policy

1. Warranty timeline

Models Parts List Warranty Period
3D Printing Related Products

Neptune 3

Neptune 3 Pro/3 Plus/3 Max

Neptune 4/4 Pro/4 Plus/4 Max

OrangeStorm Giga

PEI Platform Plate, Nozzle, Heater, Thermistor, PTFE Tube, Tools No warranty
Hot End 3 Months
Extruder Kit 6 Months
Main Parts of the Machine 12 Months
Jupiter Release Film, Tools No warranty
LCD Screen 3 Months
Resin Tank, Build Plate 6 Months
Other Main Parts of the Machine 12 Months
Mars 2/2 Pro/3/3 Pro/4/4 MAX/4 DLP/4 Ultra/5/5 Ultra

Saturn S/Saturn 2/Saturn 8K/3/3 Ultra/4/4 Ultra

Jupiter SE
Release Film, Tools No warranty
LCD Screen, Resin Tank, Build Plate 6 Months
Other Main Parts of the Machine (FEP&Tools Excluded) 12 Months
Mercury
Mercury Plus V1.0/V2.0/V3.0
Mercury X/XS Bundle
Main Parts of the Machine (Tools Excluded) 12 Months
PHECDA LASER
ENGRAVER &
CUTTER-
10w/20W
Main Parts PCB, Motor, Laser head, Power Adapter 12 Months
Other Parts① Fans 6 Months
Other Parts② Synchronous belt, motor connection line, laser connection line 3 Months
Consumables and
Other attached
Power cord, USB cable, Engraving Material (filter cartridge, wood board, stainless steel sheet, leather, etc.), user manual, packaging, tools (hexagonal wrench, open-end wrench), etc. No warranty
Arduino Kits, Robot Kits & Component Kits All All 12 Months
Pre-owned Products All All No warranty
Accessories (For individual purchases) Release Film:FEP/PFA/ACF Release film is a consumable product without warranty No warranty
LCD Screen:
Mars/Jupiter
Resin leakage, scratch-resistant film damage, human damage, collision damage are not included in the warranty. 3 Months

LCD Screen:
Mars 2/2 Pro/3/3 Pro/4/4 Ultra/4 Max/5/5 Ultra

Saturn /S/2/8K/3/3 Ultra/4/4 Ultra/Jupiter SE

Resin leakage, scratch-resistant film damage, human damage, collision damage are not included in the warranty. 6 Months
Build Plate Damage caused by scratches, drops or bumps is not covered by the warranty. 6 Months
Resin Tank Installation tools and screws are not warranted 6 Months
Air Purifier:
Mini/USB/Mars Mate
Consumables (activated carbon) are not warranted, as well as human damage, disassembly is not covered by the warranty. 12 Months
Mini Heater Consumables (activated carbon) are not warranted, as well as human damage, disassembly is not covered by the warranty. 12 Months
Washing Bucket:Mercury Plus V1.0/ V2.0Mercury X/XS Bundle No warranty for damage caused by man / misuse (e.g. resin curing inside the bucket). 6 Months
3D Stainless Steel Funnel 3D Stainless Steel Funnel is a consumable product without warranty No warranty
PEI Platform Kit/PEI Magnetic Platform Kit PEI Platform Kit is a consumable product without warranty No warranty
Nozzle Kit Nozzle Kit is a consumable product without warranty No warranty
PTFE Tube PTFE Tube is a consumable product without warranty No warranty
Hotend Kit Hotend Kit (Nozzle, PTFE Tube Excluded) 3 Months
Extruder Kit/Printhead Kit Entire Dual-Gear Direct Extruder Kit 6 Months
Cooling Fan Kit Including 4010/4015 Blower Fan and 6010 Axial Flow Fan 12 Months
STM 32-bit Silent Motherboard Motherboard 12 Months
Enclosure All 12 Months
Dual Printhead Mounting Plate All 12 Months
Four-Printhead Mounting Plate All 12 Months
5KG Large Spool Holder Kit All 12 Months
Camera All 12 Months
Filament Vacuum Storage Bags Kit The pump is guaranteed for 1 month and the vacuum bag is a consumable product without warranty. 1 Month
Rotary Attachment:
PHECDA Laser Engraver
All 12 Months
10W/20W Air Assist:PHECDA Laser Engraver All 12 Months
Enclosure:PHECDA Laser Engraver All 12 Months
Honeycomb Panel:
PHECDA Laser Engraver
Honeycomb Panel is a consumable product without warranty No warranty
Raisers:PHECDA Laser Engraver All 12 Months
Composite Filter:PHECDA Laser Engraver Composite Filter is a consumable product without warranty No warranty
10W/20W Laser Module:PHECDA Laser Engraver All 12 Months
Window Mirror:PHECDA Laser Engraver Window Mirror is a consumable product without warranty No warranty
20W Adapter:PHECDA Laser Engraver All 12 Months
Metal Business Cards All No warranty

2. Warranty Rules for Laser Head and Tube

  1. Laser Head WarrantyRules:
      The rate of laser power drop is related to the frequency of use, working hours, and working environment.
    Laser Tube Warranty Rules:

a). If the laser tube is found to be damaged during the first unpacking inspection, after-sales warranty service can be provided normally;

b). During the warranty period, if the laser tube cannot emit light normally, but no obvious appearance defects are found, after-sales warranty services can be provided normally;

c). During the warranty period, if the laser tube has any appearance cracks (including but not limited to cracks caused by improper handling or cracks caused by freezing temperatures), after-sales warranty services can't be provided normally.

 

3. Warranty Period

All times shown on this page are calculated from the date the original order was received. If you receive free replacement products or accessories, the warranty period will still be calculated from the date the original order was received.

4. Warranty Forfeiture

The following Conditions Are Not Covered Under Warranty:

  1. Products without sufficient proof of purchase
  2. Lost or stolen products
  3. Items that have expired their warranty period
  4. Non-quality-related issues (after 30 days of purchase)
  5. Free products
  6. Repairs through 3rd parties
  7. Damage from outside sources
  8. Damage from misuse of products (including, but not limited to: falls, extreme temperatures, water, and operating devices improperly)
  9. Purchases from illegitimate resourcesor second-handed parties
  10. Normal discoloration, wear, or consumption during product use.

 

Return & Refund Policy

1. For Unwanted Items
*This clause does not apply to Pre-owned & Refurbished items.

If the Elegoo product that you purchased does not meet your satisfaction but was not confirmed defective by certified Elegoo technicians, we call such product as “unwanted product”.

  1. For products in condition unopened (all original tags and labels attached), within 14 days of delivery, you may return them with an "unwanted reason" and get a refund. You are responsible for the shipping fees, and ELEGOO will charge a 5% restocking fee based on the order amount.

  2. For products in condition open-box and unused, within 14 days of delivery, you may return them with an "unwanted reason" and get a refund. You are responsible for the shipping fees, and ELEGOO will charge a 15% restocking fee based on the order amount.

  3. For used products or orders beyond 14 days, refunds for unwanted products are not available.

     

    Unwanted Issue

     

    Product Status

    Items

    Responsibility of Return Shipping Charges

    Restocking Fee

    Deduction Fee

    Refund

    Within 14 Days

    Unopened

    Customer

    5% based on the order amount

    If the returned machine detects key parts missing, the corresponding fees will be deducted.

    Open-box and unused

    Customer

    15% based on the order amount

    Used

    ×

    ×

    ×

    Within Warranty

    All Status

    ×

    ×

    ×

    ×

    Important: After receiving the goods, please keep the original box for at least 14 days. If you need to return the goods, you must pack the products in the original box.

    For your own benefit, we recommend that you use a traceable carrier that can provide you with the delivery confirmation to ship your Product for refund back to the location instructed in the RMA authorization. Elegoo shall not be responsible for any loss or damage to the returning product caused in transit.

     

    The returning product will be thoroughly inspected by Elegoo when received and a decision will be made whether the inspection criteria are met. If your returning product fails to satisfy the inspection criteria and has been shipped to Elegoo, your non-conforming product for refund will be rejected or subject to a deduction fee at Elegoo’s sole discretion.

     

    After the 14-day refund window has expired, your only recourse regarding the products is through our warranty.

    2. For Quality-Related Items

    1. Product is defective when you receive it, within 14days of delivery, you can return defective items to Elegoo and get a full refund or replacement, and Elegoo is responsible for return shipping charges. Or you can ask Elegoo to repair defective items, and Elegoo is responsible for repair fees.
    2.  Beyond the 14days but within warranty, a full refund and replacement are not available, but repair is acceptable. Elegoo is responsible for repair fees.
    3.  Out of warranty, Elegoo will provide free technical support, if the parts need to be replaced, the customer is responsible for the repair fees, which means the customer needs to purchase the parts and bear the freight.

     

    Quality-Related Issue

     

    Items

    Responsibility of Fees

    Refund

    Replace

    Repair

    Return Shipping Charges

    Repair Fees

    Within 14 Days

    Elegoo

    Elegoo

    Within Warranty

    ×

    ×

    ×

    Elegoo

    Out of Warranty

    ×

    ×

    ×

    Customer

    Important: 1. After receiving the goods, please keep the original box for at least 14 days. If you need to return the goods, you must pack the products in the original box.

    2. To avoid any delay or denial of processing your refund and replacement request, please verify that the returning product must be with all parts & accessories included and all original tags and labels attached and in the original box (generic boxes will be rejected).

    3. Process After Returning Product

    After receiving your return and inspecting the condition of your item, we will process your return. Please allow at least 7 days from the receipt of your item to process your return. We will notify you by email when your return has been processed and move to the next warranty process, refund you the payment via Paypal, or send a new replacement to you.

     

    Contact Us

    Regarding product issues, please don't hesitate to contact us at the customer service channels below to acquire technical support, refund or exchange.

     

    1. For 3D Printertechnical support: 3dp@elegoo.com 
    2. Forlaser engraver technical support: lec@elegoo.com
    3. For order issues, unwanted item refunds, or returns: info@elegoo.com
    4. For STEM kits, robots technical support: service@elegoo.com

       

      When contacting our customer service team, the buyer must provide sufficient proof of purchase (the order number from online purchases made through ELEGOO, Amazon, or other ELEGOO's authorized resellers), tell us which product you purchased, and describe the problem as clearly as possible through text, images or short videos. This will help our team to process your inquiries and help you solve the problems more efficiently.

      Incredible Print Quality

      ELEGOO Mars 3 Pro comes with a 6.6 inches 4K mono LCD screen with a resolution of 4098*2560 and an XY resolution of 35μm, providing prints with fine details and high precision, which far surpasses FDM printers in quality and speed.

      In addition, there is a replaceable scratch-resistant tempered glass above the LCD screen with a perfect fit for better light transmission and protection.

      Truly Accurate Printing

      Upgraded COB UV LED light source with 36 highly integrated LED lights perfectly matches with Fresnel lens, ensuring the light intensity distribution across the entire screen uniform with consistent accuracy.

      PFA Release Liner

      With less release tension to better protect the small supports, so that the parts won't stick to the PFA release liner due to excessive suction when printing, thereby improving the printing success rate at a higher level of detail.

      High Stability with High Throughput

      Sandblasted surface build plate with non-slip hexagon socket screws for quicker and easier leveling, which is more stable for printing bigger models or multiple small parts in one go in a large build volume of 143.43×89.6×175mm³ /5.647×3.52×6.8 in³.

      The new heat dissipation system includes double heat-conducting copper heat tubes and a cooling fan for faster ventilation and heat dissipation, with less than 5% light decay after 6000 hours of continuous printing.

      The activated carbon filtration system can effectively reduce the divergence of odor for a refreshing printing environment.

      Support both Chitibubox Pro slicer and Lychee Slicer 3.0 software. New features are added to Chitubox Pro software, such as an automatic support algorithm, model repair tool, easy object manipulation, and many other functions to realize the infinite possibilities of 3D printing.

      What's In Box

      Show More(7+)

      Specification

      BUILD VOLUME

      143 x 89.6 x 175 mm³

      PRINTING SPEED

      30-70mm/h

      LAYER THICKNESS

      0.01-0.2 mm

      XY RESOLUTION

      0.035 mm (4098*2560)

      Z-AXIS ACCURACY

      0.00125 mm

      PRINTING TECHNOLOGY

      MSLA

      LIGHT SOURCE

      COB light source + Fresnel lens

      LCD SCREEN SIZE

      6.6-inch 4K Mono screen

      LCD SCREEN PROTECTOR

      9H hardness tempered glass

      CONNECTION METHOD

      USB offline printing

      SYSTEM

      EL3D-3.0.1

      SLICING SOFTWARE

      CHITUBOX

      OPERATING SCREEN

      3.5-inch resistive touch screen

      LANGUAGE

      Chinese, English

      AIR PURIFIER

      Plug-in

      OTHER FUNCTIONS

      N.A.

      RESIN

      Supports most resins on the market (water-washable, standard, ABS-like, plant-based, etc.)

      POWER REQUIREMENTS

      100-240V 50/60Hz 24V 3A

      HEAT DISSIPATION METHOD

      3 copper heat pipes + single fan

      DIMENSIONS

      227 x 227 x 438.5 mm³

      Net Weight

      5.2 kg

      Gross Weight

      7.5kg

      Show More(16+)
      Find Your Ideal 3D Printer
      Find Your Ideal 3D Printer
      Find Your Ideal 3D Printer
      Find Your Ideal 3D Printer
      Find Your Ideal 3D Printer
      Find Your Ideal 3D Printer
      Find Your Ideal 3D Printer
      Find Your Ideal 3D Printer
      Find Your Ideal 3D Printer
      Find Your Ideal 3D Printer
      Find Your Ideal 3D Printer
      Find Your Ideal 3D Printer
      Find Your Ideal 3D Printer
      Find Your Ideal 3D Printer
      Find Your Ideal 3D Printer
      Find Your Ideal 3D Printer
      Find Your Ideal 3D Printer
      Find Your Ideal 3D Printer
      Find Your Ideal 3D Printer
      Find Your Ideal 3D Printer
      Find Your Ideal 3D Printer
      Find Your Ideal 3D Printer
      Find Your Ideal 3D Printer
      Find Your Ideal 3D Printer

      FAQs

      How long does delivery take after shipping?

      1. In-stock Product: 3-7 workdays for delivery

      2. Pre-owned Product: 4-8 workdays for delivery

      3. Pre-order Product: We will ship the product according to the estimated delivery time on the page, after shipment, it takes 3-7 workdays for delivery.

      What countries do you ship to?

      Click to view available countries

      Do you offer free shipping service?

      Click to view shipping Fees.

      Can I change the delivery address of my package after it has been shipped out?

      Unfortunately, we cannot change the shipment once the product is shipped.