








Centauri
$549.99
/
Shipping calculated at checkout.
- Print Right Out of the Box
- Full-Auto Calibration, No Manual Adjustment
- CoreXY with 500 mm/s Velocity
- 20,000 mm/s² Acceleration
- Build Volume 256 × 256 × 256 mm
Product information
Where We Ship
Orders placed on Elegoo official website can be shipped to the following countries and regions:
1. Once the package has been dispatched, please promptly monitor its status. If you encounter any of the following situations, please contact us immediately to prevent exceeding the logistics channel's tracing period: the package status remains unchanged for over 7 days, or if the package has been signed for but not received by you.
2. Upon receiving the goods, please ensure that the order is complete and undamaged. For any logistics inquiries, feel free to reach out to us without delay.
Contact Information:
A. If you have opted for Worry-Free Delivery, you will receive an email from Seel. In case of lost, stolen, or damaged products due to logistics issues, please report these concerns via the Seel email or seek assistance by contacting them.
B. If you have not chosen Worry-Free Delivery, you can contact us at info@elegoo.com. We will coordinate with the logistics company to verify the situation and assist you in filing a claim if necessary.
Shipping Restrictions
- [the United States] We can ship orders to the contiguous 48 states and the District of Columbia, excluding Alaska, American Samoa, Micronesia, Guam, Hawaii, Marshall Islands, Northern Mariana Islands, Palau, Puerto Rico, and the U.S. Virgin Islands. Please note that we are unable to ship to P.O. Boxes and APO/FPO addresses.
- [United Kingdom] We are unable to ship to P.O. Boxes, BFPO addresses and Bermuda. Due to high transportation costs, some pre-owned products (good used/for parts only/damaged) and OrangeStorm Giga will not support delivery to the Scottish Highlands, Scottish Islands, Northern Ireland, Jersey, Guernsey.
- [Australia] Unable to ship the Jupiter and Jupiter SE 3D printer to post office addresses.
- You may only ship to one address per order. If your order contains items that require shipping to multiple locations, you’ll need to place separate orders for each address.
Shipping Fees
For orders shipped to EU countries and the United Kingdom (EXCEPT for several countries and regions listed below), we are responsible for customs duties.
Several countries and regions are: Norway, Switzerland, Las Palmas (ES), Santa Cruz de Tenerife (ES), Ceuta (ES), Melilla (ES), Åland Islands (FI), etc.
Ownership, Terms, and Risk
1. Please ensure your address details are correct as once the parcel is on its way we cannot re-direct it. It is your responsibility to check and verify. Should any loss be incurred due to the input of an incorrect address or a fraudulent transaction, you will be held responsible as the sole bearer of the pecuniary loss.
Note: Please do not enter any PO Box address, otherwise your package can't be dispatched by any express.
2. Typically, orders (excluding Pre-Orders) are sent to the warehouse 8 hours after placement. Orders sent to the warehouse are usually non-cancelable and unmodifiable. If you need to make changes, we'll attempt to arrange with the warehouse, but success is not guaranteed. Any costs arising from incorrect addresses or order cancellations are governed by our return and refund policies, for which you are responsible for payment.
3. Please ensure that you provide accurate information when placing your order and keep your phone line open. If a product is returned for the following reasons, we reserve the right to request payment for the return shipping and an additional re-delivery cost before we can resend the item to you:
A. If your package delivery fails because you did not contact the delivery company within 5 days of the delivery attempt.
B. If the delivery was unsuccessful due to an incorrect address.
FAQ
Q: If l order more than one product, will they be delivered at the same time?
A: Whenever posible, we ship products together. Howeve,depending on product avalalbiityor shipping methods,items may arive separately.A notification wil be
emailed for each shipment.
Refund & Warranty
Thank you for your purchase. We hope you are satisfied with your product. However, if you are not completely satisfied with your purchase for any reason, ELEGOO provides a straightforward warranty that is processed in the most hassle-free way possible. Please refer to the warranty policy below, as warranty periods and conditions vary depending on the model and parts list.
1. Warranty Periods
1. Consumable Parts
Consumable parts are either excluded from warranty coverage or covered under a limited warranty period. For the purpose of this policy, "consumables" are defined as disposable items, components, or parts of the Product that are inherently designed to deteriorate or wear out during normal use of the Product.
While these items may not be covered by the standard warranty or may have a limited warranty period as specified in the table above, we will gladly replace any consumable that fails due to a manufacturing defect, provided the printer itself is still under warranty. ELEGOO reserves the exclusive right to determine eligibility for replacement, and such decisions shall be final.
2. Accessories or Parts Purchased Separately
Accessories or parts purchased separately enjoy the same quality assurance policy as the complete machine.
3. Warranty Periods
All periods stated on this page are calculated from the date the original order was received.
4. Warranty Forfeiture
This warranty does not cover the following cases:
A. Products not purchased from ELEGOO or authorized ELEGOO distributors with a valid receipt or invoice.
B. Products that are lost or stolen.
C. Products whose warranty period has expired.
D. Free products or products that have been refunded.
E. Products repaired by a third party or modified by an individual.
F. Damage caused by external factors or misuse of products (including but not limited to resin leakage, falls, improper operation), normal discoloration, wear and tear, or other non-quality-related issues.
G. LCD screens that can not provide an identifiable SN code.
5. Warranty in Other Regions
For consumers protected by local consumer laws in their country of purchase, ELEGOO's Limited Warranty benefits are provided in addition to all rights and remedies under such laws, including but not limited to those described above. If local regulations specify a warranty period longer than our stated policy, the longer period will apply, and we will fully comply with local requirements to support our customers.
Return & Refund Policy
Important Notes:
1. These clauses do not apply to pre-owned or refurbished items.
2. All return requests must be approved by our official customer support team and be sent to our designated address as instructed. Unapproved returns may be rejected or lost, and we are not liable for such cases. Please confirm with customer support before returning to ensure safe processing.
3. The original item must be shipped within 7 days (return label is valid for 7 days) after return/replacement approval. Failure to do so will void the request, and later contact may require re-troubleshooting.
4. Please retain the original packaging to ensure your product is protected during transit. Deviating from our packaging instructions may void the warranty and incur additional charges. For warranty claims, the original box and packing materials are required to avoid processing delays.
5. The returned product will be thoroughly inspected by ELEGOO upon receipt to determine if it meets the inspection criteria. If the returned product fails to meet these criteria, your refund request may be rejected or subject to a deduction fee at ELEGOO's sole discretion.
6. Refunds or replacement products will be processed after we receive the returned item.

Print Right Out of the Box
Print Right Out of the Box

Build Volume
256 × 256 × 256 mm
Build Volume
256 × 256 × 256 mm

Full-Auto Calibration
Full-Auto Calibration

Integrated Die-Casting
Integrated Die-Casting

Advanced CoreXY Motion System
Advanced CoreXY Motion System

500 mm/s Velocity
20,000 mm/s² Acceleration
500 mm/s Velocity
20,000 mm/s² Acceleration

Print Right Out of the Box
Print Right Out of the Box

Build Volume
256 × 256 × 256 mm
Build Volume
256 × 256 × 256 mm

Full-Auto Calibration
Full-Auto Calibration

Integrated Die-Casting
Integrated Die-Casting

Advanced CoreXY Motion System
Advanced CoreXY Motion System

500 mm/s Velocity
20,000 mm/s² Acceleration
500 mm/s Velocity
20,000 mm/s² Acceleration
Print Right Out of the Box
Centauri comes to you pre-assembled, tuned, and calibrated, so you can print right out of the box. No more tedious manual adjustment. Enjoy hassle-free auto-calibration for flawless results every time.
Built for High-Speed
Centauri redefines speed with its advanced CoreXY motion system, reaching up to 500 mm/s and 20,000 mm/s² acceleration. Its 32 mm³/s flow rate enables rapid creation of larger, intricate designs, while the high-power heated bed ensures quick heat-up for instant printing.
Integrated Die-Cast Design
We spent extra to bring you the most reliable integrated die-cast aluminum construction, ensuring superior stability and reduced vibrations for high-speed printing. This robust design allows you to achieve faster prints without compromising accuracy or quality.

Feel the Smoothness
Achieve a perfect first layer with smooth surfaces and stunning details. Centauri's automatic vibration compensation and pressure advance ensures extra smoothness, bringing you lightning-fast speed without ringing or ghosting in prints.

Even More Carefree
Make printing fun and easy with user-friendly features that simplify every step. Enjoy effortless one-click filament unloading, a smart detector that alerts you to reload and pauses printing when filament runs low, automatic power loss recovery to resume printing seamlessly, and real-time fan self-checks for optimal cooling, ensuring flawless results every time.

Powerful and Speedy System
Achieve outstanding performance with Centauri's advanced operation system, featuring seamless OTA upgrades, 8G ROM for ample storage, and fast dual-band Wi-Fi for reliable LAN transfers.


Count on smooth printing with the semi-automatic belt tensioner that effortlessly maintains optimal tension, reducing vibrations and ensuring unmatched accuracy.

The upgraded dual-sided plate features a new PLA Specific Surface with excellent adhesion and minimal warping, ensuring perfect PLA printing even at lower heatbed temperatures. Explore more dual-sided plates with unique textures to make your prints stand out.

Centauri excels with advanced cooling, featuring a high-speed 5020 model fan, an efficient hotend fan, and real-time fan self-checks for optimal performance.

Enjoy effortless printing with a user-friendly 4.3-inch touch screen - it's as easy as using your smartphone. Intuitive guidance and smooth navigation make it perfect for everyone.

The heatbed nozzle wiper keeps your nozzle residue-free before each use for flawless prints every time, while the filament waste bin[1] makes post-print cleanup quick and easy.

The magnetic printhead cover makes nozzle replacements a breeze, cutting maintenance time and enhancing overall performance for seamless printing.
Notice: [1] Customers are required to print the filament waste bin themselves as it is not included in the packaging. The model for printing will be available on the provided USB drive or within the machine.
What's In Box

Centauri

User Manual

Adapter

Touch Screen

Filament Detection Sensor

Filament Sample

Unclogging Pin Tool

Allen Wrench

Screwdriver

Spare Heatbed Nozzle Wiper

USB Drive

Screw

Scraper Blade
Specifications
Printing Technology
Printing Technology
Fused Deposition Modeling
Printing Specifications
Build Volume/mm
256 × 256 × 256 mm
Printing Platform Size/mm (PEI Area)
260 × 260 mm
Printing Speed
≤ 500 mm/s (recommended 250 mm/s)
Default Acceleration
10,000 mm/s²
Maximum Acceleration
20,000 mm/s²
Printing Accuracy
±0.1 mm
Layer Thickness
0.1-0.4 mm (recommended 0.2 mm)
Temperature & Bed
Ambient Temperature
5°C - 40°C
Max. Hot bed Temperature
100°C
Max. Nozzle Temperature
320 °C
Bed Leveling Points
Auto leveling
Hot Bed Material
PEI spring steel
Display & Interface
Touch Screen Type
4.3-inch color capacitive touch screen
Language
English, French, German, Russian, Italian, Spanish, Japanese, Chinese
Machine Parts Parameters
Extruder Type
Dual-gear direct extruder
Nozzle Diameter
0.4 mm
Z-axis Lead Screw
lead screw + optical shaft
Throat Pipe Material
All titanium alloy
Motor Drive
All-axis silent drive
Motherboard
Powerful self-developed motherboard
Fast, quiet, and reliable performance
Dual-core high-performance processor
Silent drive for X/Y/Z motors
Fast, quiet, and reliable performance
Dual-core high-performance processor
Silent drive for X/Y/Z motors
Connection
Connection Method
USB, WI-FI
Input Format
STL, OBJ, 3MF, STP
Output Format
Gcode
Supported Materials
Filament Type
PLA/PETG/TPU/ABS/ASA
Filament Diameter
1.75 mm
System & Software
Firmware Type
ELEGOO OS
Slicing Software
ELEGOO Slicer (Recommended), Orca, Cura
Additional Features
Special Features
Full-Auto Calibration
Auto Filament Unloading
Filament
Detection Sensor
Power Loss Recovery
Auto Filament Unloading
Filament
Detection Sensor
Power Loss Recovery
Working Noise
Working Noise
≤ 55 dB
Power & Cooling
Power Input
100-240 VAC, 50/60 Hz
Power Output
24V
Machine Power
1100W@220V, 350W@110V
Size & Weight
Maximum Size for Machine Activity/mm (including rack & tray)
400 × 580 × 490
Machine Size/mm
398 × 404 × 490 mm
Package Size/mm
460 × 465 × 543 mm
Net Weight
14 kg
Gross Weight
17 kg
FAQs
How long does delivery take after shipping?
1. In-stock Product: 3-7 workdays for delivery
2. Pre-owned Product: 4-8 workdays for delivery
3. Pre-order Product: We will ship the product according to the estimated delivery time on the page, after shipment, it takes 3-7 workdays for delivery.
What countries do you ship to?
Click to view available countries
Do you offer free shipping service?
Click to view shipping Fees.
Can I change the delivery address of my package after it has been shipped out?
Unfortunately, we cannot change the shipment once the product is shipped.