





Mini Heater
$57.50
/
Shipping calculated at checkout.
- Intelligent Temperature Control for Hassle-Free Printing
- PTC Rapid Heating, Ultimate Speed & Efficiency
- 10,000R/Min High-Speed Fan Enables Rapid Heat Transfer
- Real-time Temperature Feedback, Printing In Your Hands
- Fresh Workspace, Assured By Air Filtration
Estimated Shipping Time from UK Warehouse -- October
Product information
Where We Ship
Orders placed on Elegoo official website can be shipped to the following countries and regions:
1. Once the package has been dispatched, please promptly monitor its status. If you encounter any of the following situations, please contact us immediately to prevent exceeding the logistics channel's tracing period: the package status remains unchanged for over 7 days, or if the package has been signed for but not received by you.
2. Upon receiving the goods, please ensure that the order is complete and undamaged. For any logistics inquiries, feel free to reach out to us without delay.
Contact Information:
A. If you have opted for Worry-Free Delivery, you will receive an email from Seel. In case of lost, stolen, or damaged products due to logistics issues, please report these concerns via the Seel email or seek assistance by contacting them.
B. If you have not chosen Worry-Free Delivery, you can contact us at info@elegoo.com. We will coordinate with the logistics company to verify the situation and assist you in filing a claim if necessary.
Shipping Restrictions
- [the United States] We can ship orders to the contiguous 48 states and the District of Columbia, excluding Alaska, American Samoa, Micronesia, Guam, Hawaii, Marshall Islands, Northern Mariana Islands, Palau, Puerto Rico, and the U.S. Virgin Islands. Please note that we are unable to ship to P.O. Boxes and APO/FPO addresses.
- [United Kingdom] We are unable to ship to P.O. Boxes, BFPO addresses and Bermuda. Due to high transportation costs, some pre-owned products (good used/for parts only/damaged) and OrangeStorm Giga will not support delivery to the Scottish Highlands, Scottish Islands, Northern Ireland, Jersey, Guernsey.
- [Australia] Unable to ship the Jupiter and Jupiter SE 3D printer to post office addresses.
- You may only ship to one address per order. If your order contains items that require shipping to multiple locations, you’ll need to place separate orders for each address.
Shipping Fees
For orders shipped to EU countries and the United Kingdom (EXCEPT for several countries and regions listed below), we are responsible for customs duties.
Several countries and regions are: Norway, Switzerland, Las Palmas (ES), Santa Cruz de Tenerife (ES), Ceuta (ES), Melilla (ES), Åland Islands (FI), etc.
Ownership, Terms, and Risk
1. Please ensure your address details are correct as once the parcel is on its way we cannot re-direct it. It is your responsibility to check and verify. Should any loss be incurred due to the input of an incorrect address or a fraudulent transaction, you will be held responsible as the sole bearer of the pecuniary loss.
Note: Please do not enter any PO Box address, otherwise your package can't be dispatched by any express.
2. Typically, orders (excluding Pre-Orders) are sent to the warehouse 8 hours after placement. Orders sent to the warehouse are usually non-cancelable and unmodifiable. If you need to make changes, we'll attempt to arrange with the warehouse, but success is not guaranteed. Any costs arising from incorrect addresses or order cancellations are governed by our return and refund policies, for which you are responsible for payment.
3. Please ensure that you provide accurate information when placing your order and keep your phone line open. If a product is returned for the following reasons, we reserve the right to request payment for the return shipping and an additional re-delivery cost before we can resend the item to you:
A. If your package delivery fails because you did not contact the delivery company within 5 days of the delivery attempt.
B. If the delivery was unsuccessful due to an incorrect address.
FAQ
Q: If l order more than one product, will they be delivered at the same time?
A: Whenever posible, we ship products together. Howeve,depending on product avalalbiityor shipping methods,items may arive separately.A notification wil be
emailed for each shipment.
Refund & Warranty
Thank you for your purchase. We hope you are satisfied with your product. However, if you are not completely satisfied with your purchase for any reason, ELEGOO provides a straightforward warranty that is processed in the most hassle-free way possible. Please refer to the warranty policy below, as warranty periods and conditions vary depending on the model and parts list.
1. Warranty Periods
1. Consumable Parts
Consumable parts are either excluded from warranty coverage or covered under a limited warranty period. For the purpose of this policy, "consumables" are defined as disposable items, components, or parts of the Product that are inherently designed to deteriorate or wear out during normal use of the Product.
While these items may not be covered by the standard warranty or may have a limited warranty period as specified in the table above, we will gladly replace any consumable that fails due to a manufacturing defect, provided the printer itself is still under warranty. ELEGOO reserves the exclusive right to determine eligibility for replacement, and such decisions shall be final.
2. Accessories or Parts Purchased Separately
Accessories or parts purchased separately enjoy the same quality assurance policy as the complete machine.
3. Warranty Periods
All periods stated on this page are calculated from the date the original order was received.
4. Warranty Forfeiture
This warranty does not cover the following cases:
A. Products not purchased from ELEGOO or authorized ELEGOO distributors with a valid receipt or invoice.
B. Products that are lost or stolen.
C. Products whose warranty period has expired.
D. Free products or products that have been refunded.
E. Products repaired by a third party or modified by an individual.
F. Damage caused by external factors or misuse of products (including but not limited to resin leakage, falls, improper operation), normal discoloration, wear and tear, or other non-quality-related issues.
G. LCD screens that can not provide an identifiable SN code.
5. Warranty in Other Regions
For consumers protected by local consumer laws in their country of purchase, ELEGOO's Limited Warranty benefits are provided in addition to all rights and remedies under such laws, including but not limited to those described above. If local regulations specify a warranty period longer than our stated policy, the longer period will apply, and we will fully comply with local requirements to support our customers.
Return & Refund Policy
Important Notes:
1. These clauses do not apply to pre-owned or refurbished items.
2. All return requests must be approved by our official customer support team and be sent to our designated address as instructed. Unapproved returns may be rejected or lost, and we are not liable for such cases. Please confirm with customer support before returning to ensure safe processing.
3. The original item must be shipped within 7 days (return label is valid for 7 days) after return/replacement approval. Failure to do so will void the request, and later contact may require re-troubleshooting.
4. Please retain the original packaging to ensure your product is protected during transit. Deviating from our packaging instructions may void the warranty and incur additional charges. For warranty claims, the original box and packing materials are required to avoid processing delays.
5. The returned product will be thoroughly inspected by ELEGOO upon receipt to determine if it meets the inspection criteria. If the returned product fails to meet these criteria, your refund request may be rejected or subject to a deduction fee at ELEGOO's sole discretion.
6. Refunds or replacement products will be processed after we receive the returned item.


Intelligent Temperature Control for Hassle-Free Printing
The Mini Heater features precise and intelligent temperature control, ensuring optimal stability from start to finish. Say goodbye to frustrating issues like mid-print detachment, warping, and poor interlayer adhesion that hinder your progress.
Forget about manual adjustments and temperature fluctuations. The Mini Heater's automatic heating function intelligently engages below 25℃ and disengages above 25℃, guaranteeing continuous heat optimization. Focus on your creativity as the intelligent temperature control takes care of the rest.

PTC Rapid Heating, Ultimate Speed & Efficiency
Experience the power of swift and efficient printing with the Mini Heater's advanced PTC heating technology. Watch in awe as the chamber temperature rapidly rises to 25°C, allowing you to dive into your printing projects with unprecedented speed.
But that's not all. Combined with its 120W ultra-high power, the Mini Heater can also achieve exceptional energy efficiency by reducing power consumption without compromising heating performance. Plus, with the PTC element's self-regulating properties, you can rest easy knowing that overheating is prevented, providing enhanced safety throughout operation.

10,000R/Min High-Speed Fan Enables Rapid Heat Transfer
Equipped with a 10,000R/Min high-speed fan, the Mini Heater provides optimal airflow and efficient, even heat distribution, eliminating hotspots and maintaining a consistent temperature, which ensures uniform melting and deposition of the print material for remarkable print quality.

Real-time Temperature Feedback, Printing In Your Hands
Stay informed and in control of your printer's temperature with real-time updates, enabling you to promptly detect and troubleshoot temperature-related issues, and ensuring optimal performance at all times.

Fresh Workspace, Assured By Air Filtration
Embrace the combination of cleanliness and precision with the Mini Heater, which incorporates an efficient air filtration system, allowing to remove impurities and ensure a clean and purified printer chamber.

Effortless Installation For Smooth Start
The Mini Heater features a user-friendly design, ensuring a seamless and enjoyable experience from unboxing to printing your first masterpiece. With its straightforward installation process, you can easily set it up and embark on your printing journey with confidence.

High Compatibility For Seamless Integration
From the latest cutting-edge releases to the trusted older versions, the Mini Heater is designed to seamlessly integrate with a wide range of ELEGOO printers, including Mars 5 Ultra, Mars 5, Mars 4 Max, Mars 4 DLP, Saturn 4, Saturn 4 Ultra, Saturn 3, Saturn 3 Ultra, Saturn 2, Saturn 8K, Saturn S and Jupiter SE.
Not limited to ELEGOO printers, the Mini Heater can also be easily adapted to work with printers from other brands. Simply refer to the adapter plate's size map and manually add the required perforations to your printer for a hassle-free integration of the Mini Heater.



① Air Outlet
② Real-time Temperature Display
③ Operation Indicator Light
④ Power Switch
⑤ Power Interface
⑥ Filter Compartment
Installation and Usage Instructions

Follow the diagram to properly attach the adapter plate to the printer's casing using the screws provided in the tool kit (only install the diagonal screws on the top left and bottom right).

Secure the Mini Heater onto the adapter plate using the screws included in the tool kit.

Connect the power, press the switch, and the Mini Heater will activate. lt will automatically trigger the heating function when the temperature inside the printer chamber descends below 25℃, sustaining the heating process until the temperature reaches 25℃. The indicator light will remain illuminated during the process to show its status.
What's In Box

Mini Heater

Filter*2

Adapter Plate

Power Adapter

Tool Kit

User Manual
Specification
MACHINE DIMENSIONS
59mm*71mm*132mm
FILTER DIMENSIONS
40.5mm*40.5mm*23mm
INPUT VOLTAGE
100-240V50/60Hz 24V5A
RATED POWER
120W
FAQs
How does the Mini Heater achieve the rapid and precise temperature control?
The Mini Heater employs rapid PTC heating technology and an intelligent temperature control system to ensure real-time temperature monitoring within the printer chamber. It automatically triggers heating function when the temperature descends below 25℃ and ceases heating when it exceeds 25℃.
How often should I replace the activated carbon air filter?
Generally, it is recommended to replace the filter at least once a month to maintain optimal performance.
What should I do if my printer doesn't have built-in perforations?
Based on the adapter plate’s size map provided in the Features section above, you can use appropriate cutting tools to manually create the required perforations on your printer's casing.
Remember, when undertaking such modifications, it is crucial to prioritize precision and caution to prevent any potential damage to the printer or its components.
How long does delivery take after shipping?
1. In-stock Product: 3-7 workdays for delivery
2. Pre-owned Product: 4-8 workdays for delivery
3. Pre-order Product: We will ship the product according to the estimated delivery time on the page, after shipment, it takes 3-7 workdays for delivery.
Do you offer free shipping service?
Click to view Shipping Fees.