









Mars 5
Shipping calculated at checkout.
- Automatic Leveling
- Smart Mechanical Sensor
- One-Click Self-Check
- Advanced Overheat Protection
- 6.6-Inch 4K Mono LCD
- COB Light Source
Pre-Order
Estimated Shipping Time from UK Warehouse before September 30.
Product information
Where We Ship
Orders placed on Elegoo official website can be shipped to the following countries and regions:
1. Once the package has been dispatched, please promptly monitor its status. If you encounter any of the following situations, please contact us immediately to prevent exceeding the logistics channel's tracing period: the package status remains unchanged for over 7 days, or if the package has been signed for but not received by you.
2. Upon receiving the goods, please ensure that the order is complete and undamaged. For any logistics inquiries, feel free to reach out to us without delay.
Contact Information:
A. If you have opted for Worry-Free Delivery, you will receive an email from Seel. In case of lost, stolen, or damaged products due to logistics issues, please report these concerns via the Seel email or seek assistance by contacting them.
B. If you have not chosen Worry-Free Delivery, you can contact us at info@elegoo.com. We will coordinate with the logistics company to verify the situation and assist you in filing a claim if necessary.
Shipping Restrictions
- [the United States] We can ship orders to the contiguous 48 states and the District of Columbia, excluding Alaska, American Samoa, Micronesia, Guam, Hawaii, Marshall Islands, Northern Mariana Islands, Palau, Puerto Rico, and the U.S. Virgin Islands. Please note that we are unable to ship to P.O. Boxes and APO/FPO addresses.
- [United Kingdom] We are unable to ship to P.O. Boxes, BFPO addresses and Bermuda. Due to high transportation costs, some pre-owned products (good used/for parts only/damaged) and OrangeStorm Giga will not support delivery to the Scottish Highlands, Scottish Islands, Northern Ireland, Jersey, Guernsey.
- [Australia] Unable to ship the Jupiter and Jupiter SE 3D printer to post office addresses.
- You may only ship to one address per order. If your order contains items that require shipping to multiple locations, you’ll need to place separate orders for each address.
Shipping Fees
For orders shipped to EU countries and the United Kingdom (EXCEPT for several countries and regions listed below), we are responsible for customs duties.
Several countries and regions are: Norway, Switzerland, Las Palmas (ES), Santa Cruz de Tenerife (ES), Ceuta (ES), Melilla (ES), Åland Islands (FI), etc.
Ownership, Terms, and Risk
1. Please ensure your address details are correct as once the parcel is on its way we cannot re-direct it. It is your responsibility to check and verify. Should any loss be incurred due to the input of an incorrect address or a fraudulent transaction, you will be held responsible as the sole bearer of the pecuniary loss.
Note: Please do not enter any PO Box address, otherwise your package can't be dispatched by any express.
2. Typically, orders (excluding Pre-Orders) are sent to the warehouse 8 hours after placement. Orders sent to the warehouse are usually non-cancelable and unmodifiable. If you need to make changes, we'll attempt to arrange with the warehouse, but success is not guaranteed. Any costs arising from incorrect addresses or order cancellations are governed by our return and refund policies, for which you are responsible for payment.
3. Please ensure that you provide accurate information when placing your order and keep your phone line open. If a product is returned for the following reasons, we reserve the right to request payment for the return shipping and an additional re-delivery cost before we can resend the item to you:
A. If your package delivery fails because you did not contact the delivery company within 5 days of the delivery attempt.
B. If the delivery was unsuccessful due to an incorrect address.
FAQ
Q: If l order more than one product, will they be delivered at the same time?
A: Whenever posible, we ship products together. Howeve,depending on product avalalbiityor shipping methods,items may arive separately.A notification wil be
emailed for each shipment.
Refund & Warranty
Thank you for your purchase. We hope you are satisfied with your product. However, if you are not completely satisfied with your purchase for any reason, ELEGOO provides a straightforward warranty that is processed in the most hassle-free way possible. Please refer to the warranty policy below, as warranty periods and conditions vary depending on the model and parts list.
1. Warranty Periods
1. Consumable Parts
Consumable parts are either excluded from warranty coverage or covered under a limited warranty period. For the purpose of this policy, "consumables" are defined as disposable items, components, or parts of the Product that are inherently designed to deteriorate or wear out during normal use of the Product.
While these items may not be covered by the standard warranty or may have a limited warranty period as specified in the table above, we will gladly replace any consumable that fails due to a manufacturing defect, provided the printer itself is still under warranty. ELEGOO reserves the exclusive right to determine eligibility for replacement, and such decisions shall be final.
2. Accessories or Parts Purchased Separately
Accessories or parts purchased separately enjoy the same quality assurance policy as the complete machine.
3. Warranty Periods
All periods stated on this page are calculated from the date the original order was received.
4. Warranty Forfeiture
This warranty does not cover the following cases:
A. Products not purchased from ELEGOO or authorized ELEGOO distributors with a valid receipt or invoice.
B. Products that are lost or stolen.
C. Products whose warranty period has expired.
D. Free products or products that have been refunded.
E. Products repaired by a third party or modified by an individual.
F. Damage caused by external factors or misuse of products (including but not limited to resin leakage, falls, improper operation), normal discoloration, wear and tear, or other non-quality-related issues.
G. LCD screens that can not provide an identifiable SN code.
5. Warranty in Other Regions
For consumers protected by local consumer laws in their country of purchase, ELEGOO's Limited Warranty benefits are provided in addition to all rights and remedies under such laws, including but not limited to those described above. If local regulations specify a warranty period longer than our stated policy, the longer period will apply, and we will fully comply with local requirements to support our customers.
Return & Refund Policy
Important Notes:
1. These clauses do not apply to pre-owned or refurbished items.
2. All return requests must be approved by our official customer support team and be sent to our designated address as instructed. Unapproved returns may be rejected or lost, and we are not liable for such cases. Please confirm with customer support before returning to ensure safe processing.
3. The original item must be shipped within 7 days (return label is valid for 7 days) after return/replacement approval. Failure to do so will void the request, and later contact may require re-troubleshooting.
4. Please retain the original packaging to ensure your product is protected during transit. Deviating from our packaging instructions may void the warranty and incur additional charges. For warranty claims, the original box and packing materials are required to avoid processing delays.
5. The returned product will be thoroughly inspected by ELEGOO upon receipt to determine if it meets the inspection criteria. If the returned product fails to meet these criteria, your refund request may be rejected or subject to a deduction fee at ELEGOO's sole discretion.
6. Refunds or replacement products will be processed after we receive the returned item.

Automatic Leveling
Automatic Leveling

One-Click Self-Check
One-Click Self-Check

6.6-Inch 4K Mono LCD
6.6-Inch 4K Mono LCD

COB Light Source
COB Light Source

Smart Mechanical Sensor
Smart Mechanical Sensor

Advanced Overheat
Protection
Advanced Overheat
Protection

Automatic Leveling
Automatic Leveling

One-Click Self-Check
One-Click Self-Check

6.6-Inch 4K Mono LCD
6.6-Inch 4K Mono LCD

COB Light Source
COB Light Source

Smart Mechanical Sensor
Smart Mechanical Sensor

Advanced Overheat
Protection
Advanced Overheat
Protection
Effortless Magic with One-Click Automatic Leveling
Effortless precision is just a click away. The Mars 5 offers advanced automatic leveling function with a simple click, allowing all skill levels to dive straight into the creative process. Say goodbye to tedious calibrations - simply unbox, power on, and print.

Print Smarter , Print Worry-Free
With a smart mechanical sensor, the Mars 5 supports residue detection to prevent damage to the LCD screen. Plus, timely alarms for resin shortages and leveling failures minimize waste and ensure uninterrupted efficiency. Stay worry-free and enjoy high-quality prints every time.

One-Click Self-Check , Ensuring Reliable Prints
Tired of setup hassles and unexpected errors ruining your printing projects? With just a simple click, the Mars 5 performs a quick self-check and verifies the optimal functionality of its components before each print. Say goodbye to wasted time and materials due to faulty components.

4K Mono LCD for Stunning Details
Featuring a 4K mono LCD with advanced COB light source, the Mars 5 faithfully reproduces intricate details with stunning fidelity and textures, bringing your ideas to life with flawless precision.

Advanced Overheat Protection , Cool and Safe
No more overheating worries. The advanced overheat protection automatically halts printing and triggers an alarm if the LED temperature exceeds 80℃. Enhanced by an efficient cooling system, the printer ensures safety, extended lifespan, and optimal performance.


The quick-release design of the build plate enables effortless removal and installation, making cleaning and maintenance a breeze.

No more resin clogs hindering your creative flow with the replaceable resin tank lock screws. Enjoy uninterrupted printing perfection every time.

Double the convenience, double the speed. The resin tank features dual pour spouts, allowing for quick and easy loading and unloading, maximizing your efficiency.

Adapt effortlessly to different surfaces and enjoy a seamless printing experience with the versatile and adjustable foot pads.

Trust the Mars 5's robust metal frame to withstand the test of time. With meticulous engineering, it is designed to endure countless printing hours while maintaining exceptional print quality and reliability.

Laser-engraved build plate features superior adhesion, preventing detachment and warping issues during printing, and ensuring effortless and damage-free removal of printed models.

With a non-stick and smooth surface, the release film offers superior release performance, ensuring effortless peeling of cured layers and eliminating incomplete detachment.

The Elegoo Mars Mate air purifier's built-in high-density activated carbon filter can effectively absorb resin odor, with the purification efficiency up to 95% for TVOC.
What's In Box

Mars 5 3D Printer

Build Plate

Resin Tank

USB Flash Disk

Mask

Gloves

Funnel

Backup Screws

User Manual

Adapter

Tool Kit

Scraper
Specification
BUILD VOLUME
143.43 x 89.6 x 150 mm³
PRINTING SPEED
MAX 70mm/h
LAYER THICKNESS
0.01-0.2mm
XY RESOLUTION
35x35μm (4098x2560)
Z-AXIS ACCURACY
0.02mm
PRINTING TECHNOLOGY
MSLA
LIGHT SOURCE
COB Light Source (wavelength 405nm)
LCD SCREEN SIZE
6.6-inch 4K Mono LCD
LCD SCREEN PROTECTOR
PET scratch-resistant film
CONNECTION METHOD
USB Interface
SYSTEM
EL3D-3.0.1
SLICING SOFTWARE
Chitubox & Voxeldance Tango
OPERATING SCREEN
3.5-inch Resistive Touch Screen
LANGUAGE
Chinese, English
AIR PURIFIER
USB connection unavailable, compatible with Mars Mate air purifier
OTHER FUNCTIONS
One-Click Automatic Leveling,
Self-Check & Overheat Protection,
Smart Mechanical Sensor (Resin Shortage Alarm/Residue Detection Alarm/Leveling Failure Alarm)
RESIN
Supports most resins on the market (water-washable, standard, ABS-like, plant-based, etc.)
POWER REQUIREMENTS
100-240V 50/60Hz 24V 3A
HEAT DISSIPATION METHOD
3 copper heat pipes + single fan
DIMENSIONS
230 x 230 x 433.5 mm³
Net Weight
6.6kg
Gross Weight
8.6kg
























FAQs
How long does delivery take after shipping?
1. In-stock Product: 3-7 workdays for delivery
2. Pre-owned Product: 4-8 workdays for delivery
3. Pre-order Product: We will ship the product according to the estimated delivery time on the page, after shipment, it takes 3-7 workdays for delivery.
What countries do you ship to?
Click to view available countries
Do you offer free shipping service?
Click to view shipping Fees.
Can I change the delivery address of my package after it has been shipped out?
Unfortunately, we cannot change the shipment once the product is shipped.