Tutorial: Build A Robot Tricycle with Your 3D Printer

INTRODUCTION

#ELEGOOTutorials series we'll show you how to make an #Arduino based, #Bluetooth controlled robot tricycle with only #3DPrinted parts besides the electronics. It requires only a few parts and everyone can be your own roboticist.

ELECTRONICS USED IN THIS PROJECT

ASSEMBLY INSTRUCTION

You can learn how to make this Arduino based gadget step-by-step in the video below:

DOWNLOAD 

Download code and schematic of this project here: https://bit.ly/38T19SY

And don't forget to share your makings with us on social networks.