













Neptune 4 Pro
Shipping calculated at checkout.
- Print Volume: 225 x 225 x 265 mm³
- Max Printing Speed: 500 mm/s
- Intelligent Segmented Heatbed
- 121 (11 x 11) Points Auto Bed Leveling
- Up To 300 °C High-Temp Nozzle
- Support PLA/TPU/PETG/ABS/ASA/Nylon Filaments
- USB/LAN Transfer
Product information
Where We Ship
Orders placed on Elegoo official website can be shipped to the following countries and regions:
1. Once the package has been dispatched, please promptly monitor its status. If you encounter any of the following situations, please contact us immediately to prevent exceeding the logistics channel's tracing period: the package status remains unchanged for over 7 days, or if the package has been signed for but not received by you.
2. Upon receiving the goods, please ensure that the order is complete and undamaged. For any logistics inquiries, feel free to reach out to us without delay.
Contact Information:
A. If you have opted for Worry-Free Delivery, you will receive an email from Seel. In case of lost, stolen, or damaged products due to logistics issues, please report these concerns via the Seel email or seek assistance by contacting them.
B. If you have not chosen Worry-Free Delivery, you can contact us at info@elegoo.com. We will coordinate with the logistics company to verify the situation and assist you in filing a claim if necessary.
Shipping Restrictions
- [the United States] We can ship orders to the contiguous 48 states and the District of Columbia, excluding Alaska, American Samoa, Micronesia, Guam, Hawaii, Marshall Islands, Northern Mariana Islands, Palau, Puerto Rico, and the U.S. Virgin Islands. Please note that we are unable to ship to P.O. Boxes and APO/FPO addresses.
- [United Kingdom] We are unable to ship to P.O. Boxes, BFPO addresses and Bermuda. Due to high transportation costs, some pre-owned products (good used/for parts only/damaged) and OrangeStorm Giga will not support delivery to the Scottish Highlands, Scottish Islands, Northern Ireland, Jersey, Guernsey.
- [Australia] Unable to ship the Jupiter and Jupiter SE 3D printer to post office addresses.
- You may only ship to one address per order. If your order contains items that require shipping to multiple locations, you’ll need to place separate orders for each address.
Shipping Fees
For orders shipped to EU countries and the United Kingdom (EXCEPT for several countries and regions listed below), we are responsible for customs duties.
Several countries and regions are: Norway, Switzerland, Las Palmas (ES), Santa Cruz de Tenerife (ES), Ceuta (ES), Melilla (ES), Åland Islands (FI), etc.
Ownership, Terms, and Risk
1. Please ensure your address details are correct as once the parcel is on its way we cannot re-direct it. It is your responsibility to check and verify. Should any loss be incurred due to the input of an incorrect address or a fraudulent transaction, you will be held responsible as the sole bearer of the pecuniary loss.
Note: Please do not enter any PO Box address, otherwise your package can't be dispatched by any express.
2. Typically, orders (excluding Pre-Orders) are sent to the warehouse 8 hours after placement. Orders sent to the warehouse are usually non-cancelable and unmodifiable. If you need to make changes, we'll attempt to arrange with the warehouse, but success is not guaranteed. Any costs arising from incorrect addresses or order cancellations are governed by our return and refund policies, for which you are responsible for payment.
3. Please ensure that you provide accurate information when placing your order and keep your phone line open. If a product is returned for the following reasons, we reserve the right to request payment for the return shipping and an additional re-delivery cost before we can resend the item to you:
A. If your package delivery fails because you did not contact the delivery company within 5 days of the delivery attempt.
B. If the delivery was unsuccessful due to an incorrect address.
FAQ
Q: If l order more than one product, will they be delivered at the same time?
A: Whenever posible, we ship products together. Howeve,depending on product avalalbiityor shipping methods,items may arive separately.A notification wil be
emailed for each shipment.
Refund & Warranty
Thank you for your purchase. We hope you are satisfied with your product. However, if you are not completely satisfied with your purchase for any reason, ELEGOO provides a straightforward warranty that is processed in the most hassle-free way possible. Please refer to the warranty policy below, as warranty periods and conditions vary depending on the model and parts list.
1. Warranty Periods
1. Consumable Parts
Consumable parts are either excluded from warranty coverage or covered under a limited warranty period. For the purpose of this policy, "consumables" are defined as disposable items, components, or parts of the Product that are inherently designed to deteriorate or wear out during normal use of the Product.
While these items may not be covered by the standard warranty or may have a limited warranty period as specified in the table above, we will gladly replace any consumable that fails due to a manufacturing defect, provided the printer itself is still under warranty. ELEGOO reserves the exclusive right to determine eligibility for replacement, and such decisions shall be final.
2. Accessories or Parts Purchased Separately
Accessories or parts purchased separately enjoy the same quality assurance policy as the complete machine.
3. Warranty Periods
All periods stated on this page are calculated from the date the original order was received.
4. Warranty Forfeiture
This warranty does not cover the following cases:
A. Products not purchased from ELEGOO or authorized ELEGOO distributors with a valid receipt or invoice.
B. Products that are lost or stolen.
C. Products whose warranty period has expired.
D. Free products or products that have been refunded.
E. Products repaired by a third party or modified by an individual.
F. Damage caused by external factors or misuse of products (including but not limited to resin leakage, falls, improper operation), normal discoloration, wear and tear, or other non-quality-related issues.
G. LCD screens that can not provide an identifiable SN code.
5. Warranty in Other Regions
For consumers protected by local consumer laws in their country of purchase, ELEGOO's Limited Warranty benefits are provided in addition to all rights and remedies under such laws, including but not limited to those described above. If local regulations specify a warranty period longer than our stated policy, the longer period will apply, and we will fully comply with local requirements to support our customers.
Return & Refund Policy
Important Notes:
1. These clauses do not apply to pre-owned or refurbished items.
2. All return requests must be approved by our official customer support team and be sent to our designated address as instructed. Unapproved returns may be rejected or lost, and we are not liable for such cases. Please confirm with customer support before returning to ensure safe processing.
3. The original item must be shipped within 7 days (return label is valid for 7 days) after return/replacement approval. Failure to do so will void the request, and later contact may require re-troubleshooting.
4. Please retain the original packaging to ensure your product is protected during transit. Deviating from our packaging instructions may void the warranty and incur additional charges. For warranty claims, the original box and packing materials are required to avoid processing delays.
5. The returned product will be thoroughly inspected by ELEGOO upon receipt to determine if it meets the inspection criteria. If the returned product fails to meet these criteria, your refund request may be rejected or subject to a deduction fee at ELEGOO's sole discretion.
6. Refunds or replacement products will be processed after we receive the returned item.

Pre-installed Klipper Firmware
Pre-installed Klipper Firmware

Dual-gear
Direct Extruder
Dual-gear
Direct Extruder

Efficient & Instant
Cooling
Efficient & Instant
Cooling

Removable Touch Screen
Removable Touch Screen

Larger Print Volume
Larger Print Volume

121 (11x11) Points
Auto Bed Leveling
121 (11x11) Points
Auto Bed Leveling

Pre-installed Klipper Firmware
Pre-installed Klipper Firmware

Dual-gear
Direct Extruder
Dual-gear
Direct Extruder

Efficient & Instant
Cooling
Efficient & Instant
Cooling

Removable Touch Screen
Removable Touch Screen

Larger Print Volume
Larger Print Volume

121 (11x11) Points
Auto Bed Leveling
121 (11x11) Points
Auto Bed Leveling
Speed Up Printing with Klipper
With the Klipper motherboard and ARM 64-bit 1.5G main frequency quad-core processor to process and execute commands faster, Neptune 4 Pro can print at up to 500mm/s, allowing you to complete your print projects quickly and efficiently. With our pre-installed Klipper firmware, you can start printing right away without the hassle of firmware installation.
In addition, it supports input shaping, which helps eliminate artifacts and resonances on the model surface, and pressure advance, which helps predict nozzle pressure for more accurate and consistent extrusion and less filament ooze and blobbing.

Potent Extrusion & Upgraded Hotend
The printer's dual-gear direct drive extruder is another key feature that ensures smooth and consistent extrusion, weighing only 75% of the Neptune 3 Pro.
The 5.2:1 reduction ratio and dual-gear design ensure a firm grip on the filament and prevent the flexible filament from slipping and grinding. The copper-titanium bi-metal throat pipe has a unique air duct design for faster heat dissipation of the throat pipe and less nozzle clogging.
The 300°C high-temp nozzle features an extended hotend design to fully melt the filament, allowing you to explore a wider range of materials, such as PLA, PETG, ABS, ASA, TPU, and high-temp filaments like nylon.
(Tips: ABS and ASA filament materials are recommended to be used in conjunction with a 3D Printer Enclosure.)

Unparalleled Heat Dissipation Performance
4.In addition to the two thickened 4015 ball bearing cooling fans on both sides of the print head, there are four 4020 ball bearing auxiliary fans behind the print head, which ensure omnidirectional rapid cooling of the newly printed layers even at a fast printing speed, and the deposited hot filament quickly bonds together for better overhang and bridge results.

Stable & Quiet Printing
The ELEGOO Neptune 4 Pro 3D printer is designed for quiet and precise printing with its silent drivers for all axes, reducing noise to below 50 dB. Its wear-resistant POM V-guide wheels move quietly, smoothly, and accurately.
The Z-axis dual lead screw + Z-axis dual motor design provides better synchronization, increasing the accuracy and stability of the print head movement.

Smoother Model Surface
Support for advanced functions like input shaping and pressure advance helps a achieve smooth model surface and consistent extrusion.

Intelligent Segmented Heatbed
With a power output of 100W + 150W, the slicing software automatically recognizes the size of the model during slicing and activates the peripheral heating zone if the model size exceeds the center heating zone (120 mm x 120 mm).
The two partitions can also be turned on and off manually for more precise temperature control.


The upgraded dual-sided plate ensures perfect PLA prints with a new specialized PLA Surface for excellent adhesion and minimal warping even at lower heatbed temperatures.
The original Textured PEI Surface ensures strong adhesion and easy print removal, supporting materials from PLA and TPU to high-temp options like ABS and carbon fiber.

No worries about unexpected power failures during printing, since the printer can resume printing after the power supply is restored.
Whenever the filament runs out or breaks, the printer will pause and alert you to prevent wasted materials and scrapped models.

After connecting your printer to the LAN, you can easily access the web terminal for remote control and monitoring.
What's In Box

Neptune 4 Pro 3D Printer

Base Unit

Gantry Frame Unit

Spool Holder Arm

Touch Screen

Spiral Cable

Screen Support Block

Filament Detector

Spool Holder

The Rear Cooling Fan

Printhead

Power Cable

Fasteners

Tools

User Manual
Specification
Product Model
Neptune 4 Pro
Printing Technology
FDM (Fused Deposition Modeling)
Frame Material
CNC machined aluminium extrusion
Voltage
115/230V 50/60Hz
File Transfer Method
LAN, USB
File Format
STL, OBJ
UI Language
English, French, German, Russian, Italian, Spanish, Japanese, Chinese
Build Volume
225 x 225 x 265 mm³
Printing Platform Size (PEI Area)
235 x 235 mm²
Machine Size
475 x 445 x 515 mm³
Package Size
630 x 510 x 260 mm³
MAXIMUM SIZE FOR MACHINE ACTIVITY/MM
475 x 550 x 735 (Including Rack & Tray)
Max. Nozzle Temperature
300 °C
Max. Hot bed Temperature
110 °C
Filament Compatibility
PLA / TPU / PETG / ABS / ASA / Nylon
Net Weight
8.9 kg
Gross Weight
13.92 kg
Resume Printing
Yes
Filament Detection
Yes
Max Speed of Tool Head
500 mm/s
Max Acceleration of Tool Head
20000 mm/s²
























FAQs
How long does delivery take after shipping?
1. In-stock Product: 3-7 workdays for delivery
2. Pre-owned Product: 4-8 workdays for delivery
3. Pre-order Product: We will ship the product according to the estimated delivery time on the page, after shipment, it takes 3-7 workdays for delivery.
What countries do you ship to?
Click to view available countries
Do you offer free shipping service?
Click to view shipping Fees.
Can I change the delivery address of my package after it has been shipped out?
Unfortunately, we cannot change the shipment once the product is shipped.