








Jupiter SE
Shipping calculated at checkout.
Notice
Please note that we are unable to ship to the postal code LL65 1SN.
- 12.8-Inch 6K Mono LCD, 51um XY resolution
- Build volume of 277.848 x 156.264 x 300 mm³
- Automatic resin feeding and recycling
- With a 4-point leveling system
- Upgraded USB Air Purifier
Product information
Where We Ship
Orders placed on Elegoo official website can be shipped to the following countries and regions:
1. Once the package has been dispatched, please promptly monitor its status. If you encounter any of the following situations, please contact us immediately to prevent exceeding the logistics channel's tracing period: the package status remains unchanged for over 7 days, or if the package has been signed for but not received by you.
2. Upon receiving the goods, please ensure that the order is complete and undamaged. For any logistics inquiries, feel free to reach out to us without delay.
Contact Information:
A. If you have opted for Worry-Free Delivery, you will receive an email from Seel. In case of lost, stolen, or damaged products due to logistics issues, please report these concerns via the Seel email or seek assistance by contacting them.
B. If you have not chosen Worry-Free Delivery, you can contact us at info@elegoo.com. We will coordinate with the logistics company to verify the situation and assist you in filing a claim if necessary.
Shipping Restrictions
- [the United States] We can ship orders to the contiguous 48 states and the District of Columbia, excluding Alaska, American Samoa, Micronesia, Guam, Hawaii, Marshall Islands, Northern Mariana Islands, Palau, Puerto Rico, and the U.S. Virgin Islands. Please note that we are unable to ship to P.O. Boxes and APO/FPO addresses.
- [United Kingdom] We are unable to ship to P.O. Boxes, BFPO addresses and Bermuda. Due to high transportation costs, some pre-owned products (good used/for parts only/damaged) and OrangeStorm Giga will not support delivery to the Scottish Highlands, Scottish Islands, Northern Ireland, Jersey, Guernsey.
- [Australia] Unable to ship the Jupiter and Jupiter SE 3D printer to post office addresses.
- You may only ship to one address per order. If your order contains items that require shipping to multiple locations, you’ll need to place separate orders for each address.
Shipping Fees
For orders shipped to EU countries and the United Kingdom (EXCEPT for several countries and regions listed below), we are responsible for customs duties.
Several countries and regions are: Norway, Switzerland, Las Palmas (ES), Santa Cruz de Tenerife (ES), Ceuta (ES), Melilla (ES), Åland Islands (FI), etc.
Ownership, Terms, and Risk
1. Please ensure your address details are correct as once the parcel is on its way we cannot re-direct it. It is your responsibility to check and verify. Should any loss be incurred due to the input of an incorrect address or a fraudulent transaction, you will be held responsible as the sole bearer of the pecuniary loss.
Note: Please do not enter any PO Box address, otherwise your package can't be dispatched by any express.
2. Typically, orders (excluding Pre-Orders) are sent to the warehouse 8 hours after placement. Orders sent to the warehouse are usually non-cancelable and unmodifiable. If you need to make changes, we'll attempt to arrange with the warehouse, but success is not guaranteed. Any costs arising from incorrect addresses or order cancellations are governed by our return and refund policies, for which you are responsible for payment.
3. Please ensure that you provide accurate information when placing your order and keep your phone line open. If a product is returned for the following reasons, we reserve the right to request payment for the return shipping and an additional re-delivery cost before we can resend the item to you:
A. If your package delivery fails because you did not contact the delivery company within 5 days of the delivery attempt.
B. If the delivery was unsuccessful due to an incorrect address.
FAQ
Q: If l order more than one product, will they be delivered at the same time?
A: Whenever posible, we ship products together. Howeve,depending on product avalalbiityor shipping methods,items may arive separately.A notification wil be
emailed for each shipment.
Refund & Warranty
Thank you for your purchase. We hope you are satisfied with your product. However, if you are not completely satisfied with your purchase for any reason, ELEGOO provides a straightforward warranty that is processed in the most hassle-free way possible. Please refer to the warranty policy below, as warranty periods and conditions vary depending on the model and parts list.
1. Warranty Periods
1. Consumable Parts
Consumable parts are either excluded from warranty coverage or covered under a limited warranty period. For the purpose of this policy, "consumables" are defined as disposable items, components, or parts of the Product that are inherently designed to deteriorate or wear out during normal use of the Product.
While these items may not be covered by the standard warranty or may have a limited warranty period as specified in the table above, we will gladly replace any consumable that fails due to a manufacturing defect, provided the printer itself is still under warranty. ELEGOO reserves the exclusive right to determine eligibility for replacement, and such decisions shall be final.
2. Accessories or Parts Purchased Separately
Accessories or parts purchased separately enjoy the same quality assurance policy as the complete machine.
3. Warranty Periods
All periods stated on this page are calculated from the date the original order was received.
4. Warranty Forfeiture
This warranty does not cover the following cases:
A. Products not purchased from ELEGOO or authorized ELEGOO distributors with a valid receipt or invoice.
B. Products that are lost or stolen.
C. Products whose warranty period has expired.
D. Free products or products that have been refunded.
E. Products repaired by a third party or modified by an individual.
F. Damage caused by external factors or misuse of products (including but not limited to resin leakage, falls, improper operation), normal discoloration, wear and tear, or other non-quality-related issues.
G. LCD screens that can not provide an identifiable SN code.
5. Warranty in Other Regions
For consumers protected by local consumer laws in their country of purchase, ELEGOO's Limited Warranty benefits are provided in addition to all rights and remedies under such laws, including but not limited to those described above. If local regulations specify a warranty period longer than our stated policy, the longer period will apply, and we will fully comply with local requirements to support our customers.
Return & Refund Policy
Important Notes:
1. These clauses do not apply to pre-owned or refurbished items.
2. All return requests must be approved by our official customer support team and be sent to our designated address as instructed. Unapproved returns may be rejected or lost, and we are not liable for such cases. Please confirm with customer support before returning to ensure safe processing.
3. The original item must be shipped within 7 days (return label is valid for 7 days) after return/replacement approval. Failure to do so will void the request, and later contact may require re-troubleshooting.
4. Please retain the original packaging to ensure your product is protected during transit. Deviating from our packaging instructions may void the warranty and incur additional charges. For warranty claims, the original box and packing materials are required to avoid processing delays.
5. The returned product will be thoroughly inspected by ELEGOO upon receipt to determine if it meets the inspection criteria. If the returned product fails to meet these criteria, your refund request may be rejected or subject to a deduction fee at ELEGOO's sole discretion.
6. Refunds or replacement products will be processed after we receive the returned item.

12.8" 6K Mono LCD
12.8" 6K Mono LCD

Spacious
Build Volume
Spacious
Build Volume

Stable Movement Structure
Stable Movement Structure

Efficient Cooling System
Efficient Cooling System

Stunning Clarity
and Sharpness
Stunning Clarity
and Sharpness

Automated Resin
Management System
Automated Resin
Management System

12.8" 6K Mono LCD
12.8" 6K Mono LCD

Spacious
Build Volume
Spacious
Build Volume

Stable Movement Structure
Stable Movement Structure

Efficient Cooling System
Efficient Cooling System

Stunning Clarity
and Sharpness
Stunning Clarity
and Sharpness

Automated Resin
Management System
Automated Resin
Management System
12.8" 6K Mono LCD
Jupiter SE comes with a 12.8-inch 6K monochrome LCD, boasting a resolution of 5448×3064 and 51-micron XY resolution, which ensures that every intricate detail of your designs isaccurately captured, resulting in stunningly precise prints.

Spacious Space for Your Projects
With a build volume of 277.848 x 156.264 x 300 mm³/10.94x6.15x11.81 inches, this provides you ample space for more ambitious projects.
You can print larger models or multiple parts in a single batch, making it ideal for professional or commercial use.

Automated Resin Management System
Jupiter SE is designed with an automatic resin feeding and recycling device that ensures a continuous supply of resin during the printing process.
Automatic resin recycling ensures that the unused resin is collected and recycled for future use, reducing waste and saving you money.

COB +Refractive Light Source
The printer adopts a COB+refractive light source that reduces light dispersion and provides uniform and consistent light exposure, resulting in sharper details, smoother final prints, and accurate dimensions.

Efficient Cooling System
There are cooling fans and heat-conducting copper tubes on both sides of the COB light source for efficient heatdissipation, maintaining a stable temperature during the printing process to extend the service life of the printer.

Hassle-free Slicing
Jupiter SE is compatible with Tango and ChituBox. You can choose from these different slicing tools for your 3D printing needs.


The Z-axis dual linear guide rail with an accuracy of 0.02mm, ensures stable and precise Z-axis movement during the printing process.

The build plate comes with a 4-point leveling system and laser-carved surface, which provides excellent adhesion during printing and no need to repeat leveling after leveling once. The rotary handle makes it easy to install and remove the build plate.

The laser-carved build plate ensures better adhesion during printing and easier removal of prints after printing is done.
What's In Box

JUPITER SE 3D Printer





Auto Resin Feeding Main Module

Bottle Cap Module*2

Cover Handle*2

Mask&Gloves

Scraper

U Disk

Adapter

Backup Screws

Tool Kit

User Manual
























Specification
LCD
12.8-Inch 6K Mono LCD
System
EL3D-3.0.1
Slicer Software
Chitubox & Voxeldance Tango
Printing Technology
MSLA
Layer Thickness
0.01-0.2mm
Printing Speed
MAX 70mm/H
Z Axis Accuracy
0.02mm
XY Resolution
51*51um (5448*3064)
Build Volume
277.848mm(L)*156.264mm(W)*300mm(H)
Light Source
COB+Refractive Light Source (wavelength 405nm)
Languages
Chinese, English
Connectivity
USB
Operating Screen
3.5-inch Resistive Touch Screen
Power Requirements
100-240V 50/60 Hz 24V 7.5A
Printer Dimensions
479.9mm(L)*377.4mm(W)*657.5mm(H)
Net Weight
19.5KG
Gross Weight
26.6kg
FAQs
How long does delivery take after shipping?
1. In-stock Product: 3-7 workdays for delivery
2. Pre-owned Product: 4-8 workdays for delivery
3. Pre-order Product: We will ship the product according to the estimated delivery time on the page, after shipment, it takes 3-7 workdays for delivery.
What countries do you ship to?
Click to view available countries
Do you offer free shipping service?
Click to view shipping Fees.
Can I change the delivery address of my package after it has been shipped out?
Unfortunately, we cannot change the shipment once the product is shipped.