Designing a Purifier with Replaceable Carbon Block supply for Mars series 3D Printers

Hello, our ELEGOO structural engineer Martian Wong updated his new design - a purifier with replaceable carbon. This purifier can also be used on Mars, Mars Pro, Mars C, Mars 2, Mars 2 Pro 3d printers. Manufactured with neptune 2 printer.

MATERIAL LIST: 

Switch（KCD1 1521mm Mini Black 4 Pin two position toggle switch*1
DC Jack（5.5mm x 2.5mm*1
DC power cable splitter one male to two female （DC5.5mm X 2.5mm*1
Red wire 70mm*1
Black wire 70mm*1
DC fan（DC12V） 50x50x10mm*1
Metal Tapping Screws M3*8mm*1pcs
Metal Tapping Screws M3*12mm*6pcs
Metal Tapping Screws M3*16mm*4pcs
3D printing main body*1
3D printing Back shell *1
3D printing Activated carbon shell*1
3D printing Activated carbon cover*1
dustproof mesh( 62*55*10mm )*1
Activated Carbon( 74*44*40mm )*1

INSTRUCTIONAL VIDEO

DOWNLOAD

☄️Manufactured with ELEGOO Neptune 2S FDM printer Model

☄️Module sharing: https://www.thingiverse.com/thing:5145378 

     PS: If all downloads report 404 errors, please download each file separately.

☄️Contact Martian Wong on Facebook：https://www.facebook.com/willun.wong.5